Building and Viewing SIP Entities in Topology View

The Topology view lets you easily build and view your main SIP entities, including trunks and ports, Trunk Groups, IP Groups, SIP Interfaces, and Media Realms. The Topology view graphically displays these entities and the associations between them, giving you a better understanding of your SIP topology and configuration. The Topology view also lets you configure additional SIP settings that are important to your deployment such as routing and manipulation. You can use the Topology view as an alternative to configuring the entities in their respective Web pages or you can use it in combination.

To access the Topology view, do one of the following:

Click the Topology View home icon (Setup menu > Signaling & Media tab > Topology View).
Click the logo, which is located in the top-left corner of the Web interface.

The main areas of the Topology view is shown below and described in the subsequent table.

Description of Topology View

Item #

Description

1

Demarcation area of the topology. By default, the Topology view displays the following names to represent the different demarcations of your voice configuration:

"PSTN": Indicates the PSTN side
"WAN": Indicates the external network side
"LAN": Indicates the internal network (e.g., inside the company)

To modify a demarcation name, do the following:

1. Click the demarcation name; the name becomes editable in a text box, as shown in the example below:

2. Type a name as desired, and then click anywhere outside of the text box to apply the name.

You can use demarcation to visually separate your voice network to provide a clearer understanding of your topology. This is especially useful for IP Groups, SIP Interfaces, and Media Realms, where you can display them on the top or bottom border of the Topology view (as shown in the figure below for callouts #1 and #2, respectively). For example, on the top border you can position all entities relating to WAN, and on the bottom border all entities relating to LAN.

By default, configuration entities are displayed on the bottom border. To define the position, use the 'Topology Location' parameter when configuring the entity, where Down is the bottom border and Up the top border:

2

Configured SIP Interfaces. Each SIP Interface is displayed using the following "SIP Interface"-titled icon, which includes the name and row index number:

If you hover your mouse over the icon, a pop-up appears displaying the following basic information (example):

If you click the icon, a drop-down menu appears listing the following commands:

Edit: Opens a dialog box in the SIP Interfaces table to modify the SIP Interface.
Show List: Opens the SIP Interfaces table.
Delete: Opens the SIP Interfaces table where you are prompted to confirm deletion of the SIP Interface.

To add a SIP Interface, do the following:

1. Click the Add SIP Interface plus icon. The icon appears next to existing SIP Interfaces, or as when no SIP Interfaces exist on a topology border, or as when there are no SIP Interfaces at all.

The SIP Interfaces table opens with a new dialog box for adding a SIP Interface to the next available index row.

2. Configure the SIP Interface as desired, and then click Apply; the SIP Interfaces table closes and you are returned to the Topology View, displaying the new SIP Interface.

For more information on configuring SIP Interfaces, see Configuring SIP Interfaces.

3

Configured Media Realms. Each Media Realm is displayed using the following "Media Realm"-titled icon, which includes the name and row index number:

If you hover your mouse over the icon, a pop-up appears displaying the following basic information (example):

If you click the icon, a drop-down menu appears listing the following commands:

Edit: Opens a dialog box in the Media Realms table to modify the Media Realm.
Show List: Opens the Media Realms table.
Delete: Opens the Media Realms table where you are prompted to confirm deletion of the Media Realm.

To add a Media Realm, do the following:

1. Click the Add Media Realm plus icon. The icon appears next to existing Media Realms, or as when no Media Realms exist on a topology border, or as when there are no Media Realms at all.

The Media Realms table opens with a new dialog box for adding a Media Realm to the next available index row.

2. Configure the Media Realm as desired, and then click Apply; the Media Realms table closes and you are returned to the Topology View, displaying the new Media Realm.

For more information on configuring Media Realms, see Configuring Media Realms.

4

Configured IP Groups. Each IP Group is displayed using the following "IP Group [Server]" or "IP Group [User]" titled icon (depending on whether it's a Server- or User-type IP Group respectively), which includes the name and row index number (example of a Server-type):

If you hover your mouse over the icon, a pop-up appears displaying the following basic information (example):

If you click the icon, a drop-down menu appears listing the following commands:

Edit: Opens a dialog box in the IP Groups table to modify the IP Group.
Show List: Opens the IP Groups table.
Delete: Opens the IP Groups table where you are prompted to confirm deletion of the IP Group.

To add an IP Group, do the following:

1. Click the Add IP Group plus icon. The icon appears next to existing IP Groups, or as when no IP Groups exist on a topology border, or as when there are no IP Groups at all.

The IP Groups table opens with a new dialog box for adding a IP Group to the next available index row.

2. Configure the IP Group as desired, and then click Apply; the IP Groups table closes and you are returned to the Topology View, displaying the new IP Group.

For more information on configuring IP Groups, see Configuring IP Groups.

IP Group icons also display connectivity status with Server-type IP Groups:

(Green with check mark): Keep-alive is successful and connectivity exists with IP Group.
(Red with "x"): Keep-alive has failed and there is a loss of connectivity with the IP Group.

The line type connecting between an IP Group and a SIP Interface indicates whether a routing rule has been configured for the IP Group. A solid line indicates that you have configured a routing rule for the IP Group; a dashed line indicates that you have yet to configure a routing rule.

Note:

You can also view connectivity status in the IP Groups table.
To support the connectivity status feature, you must enable the keep-alive mechanism for the Proxy Set that is associated with the IP Group (see Configuring Proxy Sets).
The green-color state also applies to scenarios where the device rejects calls with the IP Group due to low QoE (e.g., low MOS), despite connectivity.

5

Links to Web pages relating to commonly required SBC configuration:

Classification: Opens the Classification table where you can configure Classification rules (see Configuring Classification Rules).
Number Manipulation: Opens the Outbound Manipulations table where you can configure manipulation rules on SIP Request-URI user parts (source or destination) or calling names in outbound SIP dialog requests (see Configuring IP-to-IP Outbound Manipulations).
Routing: Opens the IP-to-IP Routing table where you can configure IP-to-IP routing rules (see Configuring SBC IP-to-IP Routing Rules).
SBC Settings: Opens the SBC General Settings page where you can configure miscellaneous settings.

6

Configured Trunk Groups. Each Trunk Group is displayed using the following "Trunk Group"-titled icon, which includes the row index number:

To edit or delete the Trunk Group, click the icon, and then from the drop-down menu, choose Show List to open the Trunk Groups table.

To add a Trunk Group, do the following:

1. Click the Add Trunk Group plus icon. The icon appears next to existing Trunk Groups or as when there are no Trunk Groups.

The Trunk Groups table opens, allowing you to configure a Trunk Group.

2. Configure the Trunk Group as desired, and then click Apply; the Trunk Groups table closes and you are returned to the Topology View, displaying the new Trunk Group and a line connecting it to the associated port, as shown in the example below:

For more information on configuring Trunk Groups, see Configuring Trunk Groups.

7

Displays the device's hardware configuration concerning telephony (Tel/PSTN) trunks and ports. It also displays the number of ports. The ports are displayed as round icons, as shown in Item #6 above.

To configure a digital trunk, do the following:

1. Click the icon, and then from the drop-down menu, choose Trunk Settings; the Trunk Settings page appears.
2. Configure the trunk as desired.

For more information on configuring trunk settings, see Configuring Trunk Settings.

8

Links to Web pages relating to commonly required Gateway configuration:

Number Manipulation: Opens the Destination Phone Number Manipulation for IP-to-Tel Calls table where you can configure destination phone number manipulation rules for IP-to-Tel calls (see Configuring Number Manipulation Tables).
Routing: Opens the IP-to-Tel Routing table where you can configure IP-to-Tel routing rules (see Configuring IP-to-Tel Routing Rules).
DTMF & Dialing: Opens the DTMF & Dialing page where you can configure DTMF and dialing related settings.
GW Settings: Opens the Gateway General Settings page where you can configure general gateway related settings.